Wet Dry Film Lamination Machine (GF-B)

Film lamination machine 1.Laminating speed:90m/min 2.Air-expansion shaft 3.Oscillating arm 4.Panasonic/Schneider electric

Wet Dry Film Lamination Machine (GF-B) 

Application and Features:

The laminating machine is applied to laminating various roll materials, such as plastic film, PE( 25-150um),paper(30-150um), and aluminum foil(7-3um), etc, in two-layer or multi-layer manner.

This laminating machine adopts photoelectric correcting system, imported photoeletric and hydraulic correcting system, magnetic powder tension control, with the characteristic of simple operation, low noise, low energy consumption and little air pollution, etc.

1. Air-expansion shaft: for first unwinder, second unwinder and rewinder. 

2. Photoelectric correction device: for first unwinder.  

3. Magnetic powder: control the tension of first unwinder, second unwinder and rewinder.

4. Mesh roller: for glue spreading;

    Scraper from Switzerland: to oscillate when glue spreading.

5. Main motor adopts frequency conversion adjusting speed and Panasonic frequency converter.

6. The inner of laminating hot-roller: heated by heat-conducting oil with even temperature and energy saving. 

 7. Pneumatic pressure machanism: for glue spreading pressing roller and laminating pressing roller, whose pressure can be regulated.

 8. The oven is 7.5m;

     The inner guiding rollers shaped in arch: driven by chain initiatively;

9. The oven is heated by electricity;

    The oven devided into three sections of independent temperature control:the  temperature in every section can be regulated independently;

.

Wet Dry Film Lamination Machine (GF-B)